Compare the chain, not just the microphone.

Two real audio paths, with the interface, cables and mounting kept in the calculation.

By CFGMode · Sources checked 7 October 2026 · How we research

Desktop microphone for recording and streaming
Desk inspiration · Pexels

A microphone price is not the cost of a recording setup. A USB microphone can connect directly to a computer. An XLR microphone needs another device to turn its signal into something the computer can record. Mounting, cables and headphones are part of that decision.

Here we compare two specific paths from the catalogue: Elgato Wave:3 MK.2 with wired headphones, and the black RØDE PodMic with Focusrite Scarlett Solo 4th Generation and headphones. We have not recorded comparative sound samples or measured either complete desk. The recommendation below is about dependencies and how much equipment you want to manage.

Two signal paths

USB · voice → Wave:3 MK.2 → USB-C → computer

XLR · voice → PodMic → XLR cable → Scarlett Solo → USB → computer

What each named recording path needs
RequirementWave:3 MK.2 pathPodMic + Scarlett Solo path
MicrophoneUSB condenser microphone.Dynamic XLR PodMic; not the PodMic USB.
Separate interfaceNo separate XLR interface in this path.Scarlett Solo 4th Gen provides the microphone input.
Computer connectionUSB-C; verify the host and OS.USB connection from the interface; verify the host and OS.
MonitoringWired headphones at the mic output.Wired headphones at the interface output.
MountingA desk stand is included.A suitable stand or arm must be supplied or reused.
Microphone cableIncluded USB-C cable.A balanced XLR cable must be supplied or reused.

Elgato lists a desk stand and a 250cm USB-C cable in the MK.2 box, along with a 3.5mm headphone output. Its stated computer requirements include Windows 11 or newer, or macOS 14.2 or newer, and a USB-C port. Match the generation: the original Wave:3 is a different product. Elgato MK.2 specification and package ↗.

The XLR extras are real purchases

RØDE identifies the PodMic as a dynamic microphone with an XLR output and lists a mass of 937g. Use that published weight when checking a stand or arm. Its integrated mount does not replace the support attached to the desk. RØDE PodMic datasheet ↗.

Focusrite lists one microphone preamp and a 1m USB-C-to-USB-A cable with Scarlett Solo 4th Gen. An XLR cable is not that USB cable. Our XLR list assumes you already have a balanced XLR cable and suitable mic support; buy or verify those separately if you do not. Focusrite Solo specification and package ↗.

Check the headphone connection as well. The ATH-M20x’s supplied adapter supports its larger plug connection, but an existing pair of headphones may need a different adapter. Wireless listening and the direct wired-monitoring path are different choices. Audio-Technica package and connectors ↗.

Choose the route you want to operate

Start with the USB path if you want one microphone for calls, narration or a solo stream and the existing computer meets its requirements. It reduces the number of separate devices in this particular chain. Buying an extra interface for this microphone does not create an XLR connection it does not have.

Choose the XLR path if you want the microphone and interface to be separate choices and you are willing to handle the gain, mounting and cabling. That separation can be useful when replacing one part later. It is not evidence that the result will sound better in your room.

Scarlett Solo has one microphone input. If you plan to record two people with two XLR microphones, this single-mic list is the wrong starting point. Count the inputs you need before shopping for an interface. The same applies to an instrument and a microphone: identify their input types rather than assuming two sockets are interchangeable.

Before adding more gear, record a short spoken sample with the software you will actually use. Listen for clipping, distracting room sound and unwanted keyboard noise. Confirm the selected input and monitor path. A successful local test is more useful than an unsupported promise about broadcast quality.

Check the exact products

Both lists reuse a computer. The USB list includes the named mic’s stand and cable; the XLR list requires the owned stand and XLR cable described above. Open a setup for compatibility notes and to mark the gear you already have. Store buttons check the exact mapped UK products.

Your voice, first

A USB mic and wired monitoring for an existing host.

Ad · paid links. As an Amazon Associate I earn from qualifying purchases.

An existing Windows 11 or macOS 14.2+ host with USB-C. Prices change. Check before you buy.

See the list and customise →

The one-voice podcast

A dynamic microphone, interface and a visible signal chain.

Ad · paid links. As an Amazon Associate I earn from qualifying purchases.

A stand rated for the 0.937kg microphone and a standard balanced XLR cable. A verified supported Windows/macOS recording computer. Prices change. Check before you buy.

See the list and customise →